Floor Pan/Sills

 Rear Deck
 
 Inner Fenders
 
 Paint Stripping

  Rear Valance

A little history about my car-

I bought the car from my father a few years back. It had been stored in his garage for the last 20+ years. Once I got the car home I thought I could do a little work on the engine, replace the interior and then drive the car for the summer. Well, the engine ran fine except for the exhaust which I replaced. While I had the interior completely removed I figured it would be a good time to give the car a coat of paint. I took out my electric sander and began removing the surface rust and other flaws in the paint. It didn't take long for the sander to drop into the fender about 1/2 inch. Seems as though I had a little problem with some body filler. After this discovery I continued around the car with my sander and found that whom ever had done the body work on this car should have been a sculptor. This thing was just loaded with  plastic. All four fenders, the inner and outer sills on both sides, the floor pans, left and right B post assemblies, the complete rear deck, both rear inner fenders and while I was at it the front and rear valances would all have to be replaced. So much for driving the car this summer.