How To Update Firmware

1. Download firmware v757-78

2. Use an xD-Picture Card or CF card formatted on C-8080Wide Zoom.

Create a folder “Firmware” on the card and save the firmware.bin file to the Firmware folder.

3. Use an AC adapter to power the camera or a freshly charged battery pack.

Insert the card with the firmware into the C-8080 and turn the camera on in play mode.

4. The monitor will show current firmware version and inquiry of firmware rewriting.

Then select “YES” (“Yes” will be green) and press “OK”, rewriting of firmware will start automatically.

If you decide not to update the firmware simply turn off the camera.

5. During the rewriting of firmware “EXCHANING” is displayed on monitor.

It will take about 1.5 minutes to complete. Please do not operate any key or turn off the power. It might damage the camera and firmware.

6. When the rewriting is done the monitor will show the latest firmware for a spit second and the camera will shut down.

7. Format the card in other than the playback mode.

_______________________________________________________________________

What is fixed with an upgrade from version 75 to version 78.

1. When in BULB mode for 40 seconds with Noise Reduction OFF and using ISO 400 there is stray light in the exposure.

2. After the external flash is fired, the flash charging indication is not displayed.

3. The camera may lock-up when using a defective memory card.

4. Pixel Mapping does not function properly.

5. When the camera is used in SDK mode, the Camera Controls cannot be used.

6. With the FL-50 flash and the camera lens set to the widest angle, the focal length value will not indicate less than 35 mm.

7. When in RAW mode the minimum aperture is incorrectly indicated with any software.